Description
Stainless steel tack adapter tangs are used to adapt pin diameters on headstays to the standard clevis pin size that comes on the Harken Small Boat underdeck furling unit. A third hole accepts lashing to adjust jib luff tension.
| Length (mm) | 60 mm |
| Length (in) | 2 3/8 in |
| Width (mm) | 51 mm |
| Width (in) | 2 in |
| Weight (g) | 91 g |
| Weight (oz) | 3.2 oz |
| Maximum working load (kg) | 907 kg |
| Maximum working load (lb) | 2000 lb |
| Use with furling unit | 493 |
| Tang hole to tang hole length (mm) | 35 mm |
| Tang hole to tang hole length (in) | 1 3/8 in |
| Maximum luff wire Ø (mm) | 4 mm |
| Maximum luff wire Ø (in) | 5/32 in |
| Upper pin Ø (mm) | 8 mm |
| Upper pin Ø (in) | 5/16 in |
| Lower pin Ø (mm) | 8 mm |
| Lower pin Ø (in) | 5/16 in |
