Yes the hull looks stunning, if you don’t mind us saying so ourselves, but there’s so much more going on there than just fantastic aesthetics. The testing and development that went into the RS Aero was extensive and can be attributed to the success of this modern day single-hander and why she’s such a delight to sail across the size ranges. Keep reading below to find out all of the key features of the RS Aero hull.

Hull size

• Testing showed that 4m length is long enough to support the larger helmsman, without being a handful for small sailors to launch and recover
• 1.4m beam conveniently fits a normal roof-rack

Chine

• A chined hull gives sailors more reserve stability.
• The chine peels off spray when sailing downwind and gives greater dynamic stability.
• The flatter hull panels of a chined hull allow construction from flat sheets of PU foam, reducing the weight of the core bond (cores designed to mould around tighter curves “absorb” more resin into their score cuts or honeycomb).
• The chine sits just below the water line amidships – for several advantages:
• A 35kg sailor gains approximately the same waterline beam and hence the same hull form stability as a heavier sailor.
• The RS Aero is so light there is less inertial mass to pull against when moving in during a lull or header – compensated for by the flatter hull and increased form stability.
• The chine has a small lip to reduce spray, drag and for precise positioning of the computer-cut foam panels during construction.

Gunwale design

• As the RS Aero is relatively narrow we have optimised the width with the modern approach of running the gunwale parallel to the centreline in the aft half of the boat. Advantages are:
• Maximum righting moment wherever the helm sits out, irrespective of fore and aft position
• When capsized the topside buoyancy is kept to a minimum – the boat floats lower allowing easier reach to the daggerboard
• The abrupt change of deck line at the front of the cockpit allows a fine bow without pushing out the overall width or the topsides forward
• The hull and deck are joined with a conventional gunwale. We have used the U section gunwale for the RS Aero because it creates an important carbon laminate “box frame” around the boat and distributes rig loads through a light, efficient structure. It makes righting the boat from inverted faster and safer – the gunwale gives a significantly drier and more pleasant ride upwind & tight reaching – it makes the boat much easier to hold when launching and recovering, especially in waves.

Flat panel deck

• We have used, where possible, a flat panel deck to keep straight load-paths with structural corners – so minimizing weight.
• Numerous deck profiles were tested to maximise hiking comfort whilst maintaining good “kick off” surfaces when roll tacking – and a secure feeling when sailing downwind in breeze. Styling led temptation to cut-away the deck at the transom was resisted – it is useful to sit on when bearing away in extreme conditions.

Do you want to find out more? Head to our RS Aero page for more information or call the office on 01324 861 756.

Check out the dates for the RS21 2023 season!

The newly formed UK & Ireland RS21 Class Association has announced an exciting inaugural racing circuit for 2023.

Where possible, the events are integrated into a bigger regatta not only to provide value for money but also to ensure vibrant socials, enhanced by the class’s healthy gender mix. The circuit comprises four UK and Irish events topped off with the World Championship in Sardinia, Italy which is already proving attractive to many professional and amateur international competitors, reflecting the one-design sportsboat’s International Status with World Sailing.

The season gets under way with the Royal Lymington YC Sunday Spring Series running through April as a warm-up for the Bank Holiday Scottish Series in Tarbert at the end of May before moving on to Dun Laoghaire Regatta in July. The highlight of the UK & Ireland circuit for 2023 is the four-day National Championship hosted by Lymington Town Sailing Club in early August. The event is timed to coincide with the end of Cowes Week and offers international teams the opportunity to gauge the competition ahead of the World Championships at the end of September.

Following the UK Nationals, focus for many will move to Europe with the Italian National Championship in Riva del Garda at the end of August before crossing the Tyrrenhian Sea for the World Championship hosted by the Yacht Club Porto Rotondo in Sardinia.

Back in the UK, the final circuit event of the season sees the RS21 fleet join Hamble River Sailing Club’s One Design Championship in October where the fleet also aims to take part in the winter series running into December.

The Association has also taken the opportunity to launch its new website where all event details and dates can be found. Visit www.rs21ukclass.org to find out more.

Did you know that an RS Aero hull only weighs 33kg?

Here’s everything you need to know about the RS Aero’s construction and how the weight of the hull is kept so low. Cleverly designed by the incredible duo of Jo Richards and the RS Technical team, the RS Aero was designed to be ultra-light from inception.

• Every aspect of the simple shape has been considered to minimise weight and maximise cost-efficient manufacture.
• Flatter panels on the chined hull allow construction from normal flat sheets of PU foam, reducing the weight of the core bond.
• “Chine” angles on the deck add form stiffness without additional weight.
• Low surface area reduces weight and material costs.
• Epoxy resin is used for its high strength and low water absorption properties.
• Woven glass matt is used throughout the hull and carbon fibre is used in all high-load areas, such as the hull and deck around the mast step, the hiking region of the deck, all around the gunwales and transom.
• Due to the shatter resistance of the epoxy resin system, the RS Aero has proved to be remarkably durable for such a lightweight dinghy.
• The tooling has been CNC machined to give maximum control over shape and symmetry.

Would you like to read more about the RS Aero? Click here to find out more.

SHOP RS400S & SPARES